WATERPROOFING WITH REFLECTIVE LIQUID MEMBRANE AND BROOF T2 CERTIFICATION

Cold roofing, waterproofed with a white reflective liquid membrane, with fire-resistant Broof T2 certification, designed to lower roof temperatures, improve energy efficiency, and increase solar power performance

1 SUBSTRATE / LOAD-BEARING ELEMENT

2 BONDING PROMOTER

For the construction of bonded screeds with a thickness of 1 to 3 cm, apply WINGRIP® NEXT by roller, brush, or spray at a consumption of 0.5 kg/m². The sloped screed should be applied on the fresh product.

3 SLOPED SCREED

Must have a minimum slope of 1%. It can be created using WINPLAN 370 or WINPLAN PRO. For bonded screeds with a thickness of 1 to 3 cm, it is recommended to use WINGRIP® NEXT as a fresh-on-fresh bonding promoter.

4 WATERPROOFING

Apply two coats by roller, brush, or spray of Wingum Plus® H₂O Reflex Broof T2, a colored, fiber-reinforced elastomeric liquid membrane. The product is resistant to ponding water, UV rays, and weathering. The “Reflex” versions feature high reflectance (SRI 108), and the “Broof T2” versions are certified for external fire resistance. Embed the reinforcement fabric Wintechno Mat in the first coat, applying light pressure and ensuring the fabric is fully impregnated. Total consumption in two coats: 2.2 kg/m².

5 CORNER REINFORCEMENT

Apply self-adhesive butyl strip BC SEAL BAND in corners. Together with BC SEAL PAD, it is used for the treatment of drains, roof outlets, and pipe penetrations.

6 VERTICAL UPSTAND

Apply Wingum Plus® H₂O Reflex on vertical upstands by roller, brush, or spray The product is colored, fiber-reinforced, elastomeric, and resistant to ponding water, UV rays, and weathering. When applied vertically in two coats without reinforcement mesh, the consumption is 1.6 kg/m².