Waterproofing with liquid membrane and concrete or self-locking driveway finish
Application of waterproofing with liquid membrane and finishing with concrete paving or self-locking pavers
1 STRUCTURAL ELEMENT / SUBFLOOR
2 ADHESION PROMOTER
For bonded screeds from 1 to 3 cm, apply WINGRIP NEXT with roller, brush, or spray, consumption 0.5 kg/m². Apply the screed for slopes on the fresh product
3 SLOPED SCREED
Minimum slope 1%. Made using WINPLAN 370 or WINPLAN PRO. For bonded screeds from 1 to 3 cm, it is recommended to use WINGRIP NEXT as adhesion promoter, fresh on fresh
4 WATERPROOFING
Apply WINGUM PRO TECK system, water-based bituminous liquid membrane, elastomeric, waterproof, thixotropic, resistant to water stagnation and weathering. Applied in two layers, with WINTECHNO MAT reinforcement interposed in horizontal layers. Available also in “Rapid” version for fast curing or “fresh on fresh” application. Consumption for two layers 1.8 kg/m²
5 CORNER REINFORCEMENT
Apply self-adhesive butyl strip BC SEAL BAND in corners. Together with BC SEAL PAD, it is also used for drains, floor outlets, and penetrations
6 WATERPROOFING, VERTICAL UPSTAND
Apply the first layer of Wingum Plus H2O, colored and fiber-reinforced elastomeric liquid membrane, with roller, brush, or spray. Resistant to water stagnation, UV, and weathering. Also available in “Rapid” version for fast curing or “fresh on fresh”. Consumption for two layers 1.4 kg/m²