Waterproofing with anti-root liquid membrane

Cold roof, waterproofed with liquid membrane with root-resistant feature

1 LOAD-BEARING ELEMENT

2 BONDING PROMOTER

for the construction of bonded screeds, 1–3 cm thick. Apply WINGRIP NEXT by roller, brush, or spray, with a consumption of 0.5 kg/m². While the product is still fresh, create the sloped screed.

3 SLOPED SCREED

with a minimum slope of 1%, made using WINPLAN 370 or WINPLAN PRO. For bonded screeds with a thickness of 1–3 cm, it is recommended to use WINGRIP NEXT as a bonding primer, applied fresh-on-fresh.

4 WATERPROOFING

application by roller, brush, or spray of the WINGUM PRO TECK ANTIRADICE system, a water-based bituminous liquid membrane, elastomeric, waterproof, thixotropic, resistant to ponding water and weathering. The system is applied in two coats, with horizontal reinforcement layers of WINTECHNO MAT. The product is also available in “Rapid” version, allowing fast-drying or “wet-on-wet” application. Consumption for the two coats: 2.5 kg/m².

5 PROTECTIVE / DRAINING / FILTERING LAYER

6 PLANTED AREA

7 CORNER REINFORCEMENT

application in corners using self-adhesive butyl tape BC SEAL BAND. Together with BC SEAL PAD, it is also used for drains, scuppers, and pipe penetrations.

8 VERTICAL UPSTAND WATERPROOFING

application by roller, brush, or spray of WINGUM PRO TECK, a water-based bituminous liquid membrane, elastomeric, waterproof, thixotropic, resistant to ponding water and weathering. The product is also available in “Rapid” version for fast-drying or “wet-on-wet” applications. Il consumo, nelle due mani, è di 1,2 kg/m2