EXPOSED, COLD-APPLIED, SELF-PROTECTIVE, BITUMINOUS WATERPROOFING MEMBRANE

Cold roofing, waterproofed with a double layer of bituminous membrane, applied cold, using Winglue adhesive, and self-protected with a layer of slate flakes

1 LOAD-BEARING ELEMENT

2 BONDING PROMOTER

For the construction of bonded screeds from 1 to 3 cm, apply WINGRIP® NEXT by roller, brush, or spray, with a consumption of 0.5 kg/m². While the product is still fresh, create the sloped screed.

3 SLOPED SCREED

With a minimum slope of 1%. Made using WINPLAN 370 or WINPLAN PRO. For bonded screeds with a thickness from 1 to 3 cm, it is recommended to use WINGRIP® NEXT as a bonding primer, applied fresh-on-fresh.

4 ADHESIVE FOR MEMBRANES

Apply WINGLUE or WINGLUE FAST, a water-based bituminous adhesive, by roller or brush, with a consumption of 0.8 kg/m².

5 WATERPROOFING

COVERGUM SPECIAL MINERAL, an elastoplastomeric bituminous membrane (BPP) with cold flexibility of –20 °C, applied cold with suitable adhesive. Reinforced with non-woven polyester fabric stabilized with glass fiber, rot-proof. The upper surface of the membrane is finished with natural or colored slate flakes, or ceramic granules.

6 WATERPROOFING

COVERGUM SPECIAL MINERAL, an elastoplastomeric bituminous membrane (BPP) with cold flexibility of –20 °C, applied hot on vertical upstands after treatment with bituminous primer ECOIMPRIMER, reinforced with non-woven polyester fabric stabilized with glass fiber, rot-proof. The upper surface is finished with natural or colored slate flakes, or ceramic granules.