EXPOSED LIQUID WATERPROOFING FOR HEAVY FOOT TRAFFIC AREAS

Cold roof, waterproofed with a liquid membrane suitable for heavy foot traffic

1 LOAD-BEARING ELEMENT

2 BONDING PROMOTER

For the construction of bonded screeds from 1 to 3 cm. Apply WINGRIP® NEXT by roller, brush, or spray, with a consumption of 0.5 kg/m². While the product is still fresh, install the sloped screed.

3 SLOPED SCREED

With a minimum slope of 1%. Made using WINPLAN 370 or WINPLAN PRO. For bonded screeds with a thickness from 1 to 3 cm, it is recommended to use WINGRIP® NEXT as a bonding primer, applied fresh-on-fresh.

4 TRAFFICABLE WATERPROOFING

Creation of the flooring and waterproofing by applying ONE® system by roller, brush, or spray. Suitable for heavy foot traffic and resistant to puncture, it can be applied even on damp surfaces and under extreme temperatures (0°C to 45°C). Apply in two coats with interposed reinforcement mesh ONE® MAT. Total consumption for two coats: 1.9 kg/m².

5 CORNER REINFORCEMENT

Application of BC SEAL BAND, a self-adhesive butyl tape, in the corners. Together with BC SEAL PAD, it is used for sealing drains, scuppers, and pipe penetrations.

6 VERTICAL WATERPROOFING UPSTAND

Creation of the vertical waterproofing by applying ONE® VERTICAL, a thixotropic waterproofing product for vertical surfaces and details, using roller, brush, or spray. It is puncture-resistant and can be applied even on damp surfaces and in temperatures from 0°C to 45°C. Applied in a single coat, with a consumption of 0.35 kg/m².