High traffic visible liquid waterproofing

Cold roof, waterproofed with liquid membrane suitable for high footfall

1 LOAD-BEARING ELEMENT

2 BONDING PROMOTER

for bonded screeds 1–3 cm thick, apply WINGRIP® NEXT by roller, brush or spray; consumption 0.5 kg/m². Apply the sloping screed on the fresh product.

3 SLOPED SCREED

minimum slope 1%. Made with WINPLAN 370 or WINPLAN PRO. For bonded screeds 1–3 cm thick, use WINGRIP® NEXT adhesion promoter, applied wet-on-wet.

4 WALKABLE WATERPROOFING

flooring and waterproofing applied by roller, brush or spray using ONE® system, suitable for heavy traffic and puncture resistant; applicable on damp surfaces and at extreme temperatures (0–45 °C). Applied in two coats with reinforcement ONE® MAT. Total consumption 1.9 kg/m².

5 CORNER REINFORCEMENT

self-adhesive butyl tape BC SEAL BAND; together with BC SEAL PAD for drains, outlets and penetrations.

6 VERTICAL UPSTAND WATERPROOFING

applied by roller, brush or spray using ONE® VERTICAL system, thixotropic waterproofing for vertical upstands and details. Puncture resistant; applicable on damp surfaces and at extreme temperatures (0–45 °C). Applied in a single coat; consumption 0.35 kg/m².