Stratigraphy – Tiled solar panels, waterproofed with bituminous Wingrip undertile – Bituminous membrane

STRATIGRAPHY 1 - Winkler Chimica

Tiled roof tiles, waterproofed with bituminous Wingrip undertile

Cold roof waterproofed with hot or cold bituminous membrane and finished with tiled pavement and undertile waterproofing made with single-component liquid membrane

1 LOAD-BEARING ELEMENT

2 BONDING PROMOTER

for bonded screeds 1–3 cm thick, apply WINGRIP NEXT by roller, brush, or spray; consumption 0.5 kg/m². Apply the sloping screed on the fresh product.

3 SLOPED SCREED

minimum slope 1%. Made with WINPLAN 370 or WINPLAN PRO. For bonded screeds 1–3 cm thick, use WINGRIP NEXT adhesion promoter, applied wet-on-wet.

4 REFLECTIVE PROTECTIVE COATING SYSTEM, VERTICAL UPSTAND

application by roller, brush, or spray of bituminous primer ECOIMPRIMER, total consumption 150–200 g/m².

5 WATERPROOFING

double layer of hot-applied elastoplastomeric bituminous membrane (BPP) EXPERTA 300, cold flexibility –15 °C, and EXPERTA 400, cold flexibility –20 °C; reinforced with non-woven continuous-filament polyester, glass-stabilised.

6 SOLAR SEPARATION LAYER: LDPE SHEET.

7 LOAD-DISTRIBUTING SCREED

de-bonded screed made with fast-setting screeds WINPLAN 370 or WINPLAN PRO.

8 UNDER-TILE WATERPROOFING

WINGRIP BITUMINOSO, water-based bitumen emulsion modified with high-quality fillers and polymers for excellent crack-bridging and waterproofing. Applied by roller or brush in a single coat on cement screeds and substrates; consumption 1 kg/m².

9 TILE ADHESIVE AND FLOORING

flexible adhesive ROYAL FLEX, class C2TES1, for exterior use; grouting with WINSTUCCO FLEX.

10 VERTICAL UPSTAND WATERPROOFING

hot-applied elastoplastomeric bituminous membrane (BPP) EXPERTA 400, cold flexibility –20 °C; reinforced with non-woven continuous-filament polyester, glass-stabilised.

11 ADHESION PROMOTER

application of WINGRIP NEXT by roller, brush, or spray; overcoatable after 2 hours; consumption 0.3 kg/m².

12 PLASTER

cement-based pre-mixed plaster WR05 WINTONAC on vertical surfaces; consumption 1.9 kg/m² per mm thickness.

13 Skim coat

cement-based skim WF02 RASOWIN; consumption 1.8 kg/m² per mm thickness.

14 CORNER REINFORCEMENT

self-adhesive butyl tape BC SEAL BAND; together with BC SEAL PAD for drains, outlets, and penetrations.

15 UNDER-TILE WATERPROOFING, VERTICAL UPSTAND.

16 TILE ADHESIVE, VERTICAL UPSTAND

skirting installation with flexible adhesive ROYAL FLEX, class C2TES1; followed by grouting with WINSTUCCO FLEX.

17 COPING / PARAPET CAP.