SWIMMING POOL WATERPROOFING USING BOND CEMENT AND TILED FINISH

Waterproofing method for tiled swimming pools. resistant to negative hydrostatic pressure, using a cement-based, two-component, waterproof mortar

1 CONCRETE POOL STRUCTURE – CONCRETE STRUCTURE OF THE SWIMMING POOL

2 NEGATIVE-SIDE WATERPROOFING – FIRST COAT

Application with trowel of three-component thixotropic epoxy-cementitious system WINPOX CEMENT TIXO. Formulated to cure on damp cementitious substrates, suitable for internal and external use, creating a waterproof layer resistant to positive and negative water pressure and abrasion. A small fillet is created at the base of the vertical wall along with the first coat. Consumption: 2.2 kg/m².

3 NEGATIVE-SIDE WATERPROOFING – SECOND COAT

WINPOX CEMENT TIXO, applied with a trowel. Consumption: 2.2 kg/m².

4 CORNER REINFORCEMENT

Application of self-adhesive butyl strip BC SEAL BAND in corners. Used together with BC SEAL PAD for sealing drains, skimmers, and lights.

5 UNDER-TILE WATERPROOFING

Application of two-component elastic cementitious premix WFZ5 WINFLEX CEMENT. Can be applied with trowel or spray after proper mixing of the components. Reinforce with suitable fiberglass mesh embedded in the first fresh layer. On screeds and cementitious substrates, apply a total thickness of 4 mm in two coats.

6 TILE ADHESIVE

Bonding of tiles using cementitious adhesive suitable for pool use, ROYAL SUPER SP.

7 CERAMIC FLOORING – POOL-SUITABLE CERAMIC TILES.

Joint grouting with WINSTUCCO FLEX.