Pavers with floating floors waterproofed with a liquid membrane

Warm roof, with presence of thermal insulation panel, waterproofed with liquid membrane and with floating pavement

1 SUBSTRATE / LOAD-BEARING ELEMENT

minimum slope 1%. Alternatively, sloping screed made with WINPLAN 370 or WINPLAN PRO. For bonded screeds 1–3 cm thick, use WINGRIP NEXT adhesion promoter, applied wet-on-wet.

2 PRIMER

application by roller, brush or spray of bituminous primer ECOIMPRIMER, total consumption 150–200 g/m².

3 VAPOR BARRIER

hot-applied 4 mm bitumen-polymer membrane COVERBLOCK, reinforced with glass veil and aluminium foil.

4 ADHESIVE FOR INSULATION PANELS

application by roller or brush of water-based bituminous adhesive WINGLUE or WINGLUE FAST, consumption 0.8 kg/m².

5 THERMAL INSULATION LAYER

6 WATERPROOFING

application by roller, brush or spray of WINGUM PRO TECK, elastomeric liquid bituminous membrane in water dispersion, waterproofing, thixotropic, resistant to ponding water and weathering. Applied in two coats with horizontal reinforcement WINTECHNO MAT. Available in “Rapid” version for fast curing or wet-on-wet. Total consumption 1.8 kg/m².

7 FLOATING PAVEMENT

8 CORNER REINFORCEMENT

Apply self-adhesive butyl strip BC SEAL BAND at corners. Used together with BC SEAL PAD for waterproofing drains, outlets, and penetrations.

9 VERTICAL UPSTAND WATERPROOFING

Application by roller, brush, or spray of the first coat of Wingum Plus H2O, a colored, fiber-reinforced elastomeric liquid membrane. The product is resistant to ponding water, UV rays, and weathering. In the “Reflex” versions, it features high reflectance (SRI 108). Available in “Rapid” version. Consumption in two coats of 1.6 kg/m2