Indice
Y
Winkler Waterproofing Solution RESIN SYSTEM, SWIMMING POOL SIRACUSA, SICILY
In the climatic context of Southern Italy, characterized by high temperature variations, strong solar radiation and constant presence of water, the waterproofing of in-ground swimming pools requires highly performing technical cycles. In the climatic context of Southern Italy, characterized by high temperature variations, strong solar radiation and constant presence of water, the waterproofing of in-ground swimming pools requires highly performing technical cycles.
e.
Project Objectives
The client required the complete renovation of the existing in-ground pool, with objectives including:
- restoration of the deteriorated cement substrate
- total waterproofing of walls and floor
- chemical- resistant finish for permanent immersion
- high aesthetic value
- environmentally responsible, safe products
Traditional cement-based technologies could not guarantee the required elasticity and continuity.
A high-performance resin system was therefore the optimal choice.
Why Choose a Resin System for Swimming Pools
In-ground pools are critical structures due to:
- constant immersion
- hydrostatic pressure
- structural movement
- thermal shock
- chlorine and chemical exposure
Ciclo applicativo Winkler
Il successo dell’intervento è garantito dalla stratigrafia dei prodotti utilizzati, ognuno con una funzione specifica.
WINFIX WET – Two-component epoxy-cement skim coat
For levelling and adhesion on damp cementitious surfaces.
WINFIX UNIVERSAL – Water-based epoxy primer
Primer in dispersione acquosa Designed to maximize the adhesion of the entire system
per massimizzare l’ancoraggio del ciclo finale. Uniforma l’assorbimento della superficie e garantisce la durabilità del sistema nel lungo periodo.
WINPAINT P – Water-based polyurethane colored finish
Final protective layer for swimming pools, tanks, and fountains.
On-Site Application Phases
The renovation followed a strict certified protocol:
- Removal of all loose, damaged, or incompatible layers down to sound concrete
- Hydro-sandblasting of natural stone (calcarenite) perimeter edges
- Application of two coats of WINFIX WET (500 g/m² per coat)
- Application of one coat of WINFIX UNIVERSAL
- Application of two cross coats of WINPAINT P (RAL 1015 color)
- Application of a saturation protective treatment on surrounding stone surfaces
Project Context and Contractors
The intervention was completed in Eastern Sicily by F.lli Lizzio, a specialist applicator company
Set in the province of Siracusa, the pool represents an excellent example of technical and aesthetic enhancement for outdoor wellness areas exposed to challenging Mediterranean climate conditions.
Vantaggi del sistema #WINKLERSAFE
Benefits of the #WINKLERSAFE System
- water-based formulations
- solvent-free technology
- very low VOC emissions
- safer worksite conditions
- reduced environmental impact
Results Achieved
ottenuti
The pool has achieved total waterproofness of the tub, with a uniform beige aesthetic finish (RAL 1015) that integrates perfectly into the Sicilian landscape. The structure now enjoys long-lasting protection against degradation and infiltration, with the guarantee of reduced maintenance over time.
FAQ – Frequently Asked Questions
Why choose resin systems instead of cement-based products?
Resins provide a seamless, elastic membrane that resists immersion and structural movements better than rigid cement systems.
Can the system be applied to damp substrates?
Yes. WINFIX WET is designed to cure even on damp cementitious surfaces.
Is the final finish suitable for pool water?
Yes. WINPAINT P is specific for pools, tanks, and structures containing non-potable water.
Are Winkler products safe for applicators?
Yes. They are water-based and solvent-free, meeting the #WINKLERSAFE criteria.
Can this system be used for fountains or decorative basins?
Absolutely. It is ideal for any structure intended to hold water continuously.
