SKERMO 7 (TAGLIO CHIMICO)
Skermo 7 (Taglio Chimico), siloxane based product with low environmental impact for the treatment of moisture originated from the negative side of the substrate.
SKERMO 7 creates a barrier against moisture without altering the breathability of the treated surfaces and it will prevent the resurface of efflorescence.
SKERMO 7 can be applied on concrete, bricks, prefabricated and on natural stones brickworks.
APPLICATION
Perform oblique (at approx. 45 vertical degrees) holes with 2 cm diameter, starting at 20 to 25 cm from the ground, staggered, 15 to 20 cm from each other, and deep at least half of the total thickness of the existing wall.
Insert pipes within the holes and seal the edges of the holes at the wall surface with fast grip mortar BLOCKWATER. Fill in the pipes with SKERMO 7 into the wall.
After the application it is strongly advised to cap the holes with BLOCKWATER or WR07 FIBROWIN TIXOTROPICA.
The product needs 15 to 20 days to fully dry.
After complete curing re-fill the holes with breathable plaster WF03 WINTOSAN or WF05 RASOSAN as breathable trim.
USEFUL TIPS/SURFACE PREPARATION
Ensure that the substrate to be treated is solid and not irreparably damaged.
Remove all brittle parts.
CONSUMPTIONS
- Approx. 3 kg/m for 10 mm thickness
PACKAGES
- 20 kg cans
STORAGE
The product can be stored in its undamaged package for 12 months.
Not frost-proof.
Please store in a shaded and protected place at temperatures between +5°C and +35°C.
Skermo 7 (Taglio Chimico), siloxane based product with low environmental impact for the treatment of moisture originated from the negative side of the substrate.
SKERMO 7 creates a barrier against moisture without altering the breathability of the treated surfaces and it will prevent the resurface of efflorescence.
SKERMO 7 can be applied on concrete, bricks, prefabricated and on natural stones brickworks.
APPLICATION
Perform oblique (at approx. 45 vertical degrees) holes with 2 cm diameter, starting at 20 to 25 cm from the ground, staggered, 15 to 20 cm from each other, and deep at least half of the total thickness of the existing wall.
Insert pipes within the holes and seal the edges of the holes at the wall surface with fast grip mortar BLOCKWATER. Fill in the pipes with SKERMO 7 into the wall.
After the application it is strongly advised to cap the holes with BLOCKWATER or WR07 FIBROWIN TIXOTROPICA.
The product needs 15 to 20 days to fully dry.
After complete curing re-fill the holes with breathable plaster WF03 WINTOSAN or WF05 RASOSAN as breathable trim.
USEFUL TIPS/SURFACE PREPARATION
Ensure that the substrate to be treated is solid and not irreparably damaged.
Remove all brittle parts.
CONSUMPTIONS
- Approx. 3 kg/m for 10 mm thickness
PACKAGES
- 20 kg cans
STORAGE
The product can be stored in its undamaged package for 12 months.
Not frost-proof.
Please store in a shaded and protected place at temperatures between +5°C and +35°C.
Hai bisogno di suggerimenti?
Scopri come applicare il prodotto