1. Home
  2. Product
  3. WINGUM PLUS® H₂O REFLEX RAPID

WINGUM PLUS® H₂O REFLEX RAPID

WINGUM PLUS® H₂O REFLEX RAPID, COMPLIANT WITH REGULATIONS:

  • UNI 11928-1: Liquid-applied waterproofing products (accessible exposed roofs category),
  • EAD 030350-00-0402: Liquid-applied roof waterproofing system,
  • IAPMO UES UEL-5041 FOR COMPLIANCE WITH ASTM D6083: Performance certification for liquid-applied waterproofing products for roofs and coverings.

WINGUM PLUS® H₂O REFLEX RAPID, a white, reflective, elastomeric, water-based, quick-drying liquid waterproofing product with high durability and resistance.

Thanks to its high solar reflectivity and infrared emissivity, it can reduce the temperature of the treated surface by up to 50%. It guarantees resistance to water stagnation and can be used even on large surfaces.

Its rapid drying makes it rainproof after just a few hours, allowing work to begin and end the same day.

Its unique formulation allows for high flexibility, protecting it from nighttime condensation and making it suitable for applications even during unstable weather and low temperatures. The product is resistant to normal foot traffic.

Formulated for the protection and waterproofing of highly exposed concrete or fiber cement roofs, and for the maintenance of bituminous roofing (oxidized for at least 180 days after installation), including slated roofing. To protect the reflective surface, we recommend applying WINCLEAN, a transparent, low-dirt protection product.

WINGUM PLUS® H₂O REFLEX RAPID is CRRC (Cool Roof Rating Council) certified, which certifies its solar reflectance index and emissions both when new and after three years. The SRI (Solar Reflectance Index), which measures a material’s ability to reflect and dissipate solar radiation, reached a value of 108, confirming the system’s high energy performance.

APPLICATION

It can be applied with a spatula, roller, brush, flat brush, or airless pump.

On particularly chalking surfaces, a prior application of the consolidating agent WINFIX CONCRETE is recommended.

 

Apply the product in two coats. To obtain a homogeneous and ideal thickness for waterproofing, it is recommended to always place between the two coats our reinforcement sheet WINTECHNO MAT.

 

For laying on substrates with irregular geometry (for example corrugated sheet metal), it is possible to apply the product in two coats without the interposition of WINTECHNO MAT reinforcement.

 

The system provides the application, on the perimeter edges, of the BC SEAL BAND waterproof adhesive strip.

 

For pipes, drainpipes, ventilation pipes etc, use BC SEAL PAD waterproof self-adhesive square, in combination with BC SEAL BAND.

 

Joints up to 1cm wide, must be sealed with WINJOINT BAND joint cover strip.

 

If the width of the joints is greater than 1cm, they must be sealed using a system consisting of WINJOINT FOAM (compressible joint bottom), WINJOINT SEAL (polyurethane sealant) and WINJOINT BAND


USEFUL TIPS / SURFACE PREPARATION

Carefully clean the support to remove dust, crumbly parts, foreign or non-stick substances.

 

The application must take place on a dry surface. It is always recommended to check for the presence of hidden humidity, to avoid flaking or bubbles, due to vapor pressure.

 

Provide periodic cleaning of the treated surfaces (approximately every two years) and the reapplication of WINCLEAN.

 

For floor grinding use WINLIVEL self-levelling, for irregularities from 1mm to 15mm or WINLIVEL RAPID self-levelling for irregularities from 1mm to 20mm.

 

To create the new screed, use WINPLAN 370, a quick-drying screed or WINPLAN PRO, a quick-drying screed with low water absorption.

Apply at temperatures between +5°C +35°C.


CONSUMPTIONS

  • 1.1 – 1.3 kg/m² in two coats,
  • 1.7 – 1.9 kg/m² in two coats, with interposed WINTECHNO MAT reinforcement inserted in-between.

PACKAGES

  • 5 kg buckets,
  • 10 kg buckets,
  • 20 kg buckets.

STORAGE

The product, in its undamaged packaging and stored in a cool and dry place, has a shelf-life of 12 months.

Store at temperatures between + 5°C and + 35°C.

Accessories:

  • Bc Seal Band,
  • Bc Seal Pad,
  • Winjoint Foam,
  • Winjoint Seal,
  • Winjoint Band,
  • Wintechno Mat,
  • Winseal.

Need some suggestions?

Learn how to apply the product