DISARMO 2E

Ready to use ecological form-release product with 1:5 ratio up to 1:20 ratio for wooden formworks. Highly efficient product, ensuring smooth form-stripping and a perfect product with even colour. The elimination of the “Barrier effect” guarantees painting and plastering without any further potential detachment.

    array(1) { [0]=> string(0) "" }
  • Application It can be applied with brush, roller, or spray gun.
  • Consumption 30 - 40 ml/m2 emulsion.
  • Surface Preparation Thoroughly clean the support to remove: dust, oils, greases, foreign or non-stick substances. The application must take place on a dry surface.
  • Useful Advices Ensure that the supports are clean, dry, free of dust, grease, oil, rust, wax, and any matter preventing adhesion. The product must be completely dry before resuming casting. Apply at temperatures between +5°C and +35°C.
  • Packaging 5 - 20 I can.
  • Storage The product has 12 months stability if properly packed and stored in a cool dry place. Store between +5°C and +35°C. Not frost-proof.
  • Technical data sheet