Waterproofing with bituminous membrane and draining walkable finish

Application of waterproofing with liquid membrane suitable for subsequent application of drainable pedestrian pavement

1 STRUCTURAL ELEMENT / SUBFLOOR

2 ADHESION PROMOTER

For bonded screeds 1–3 cm thick, apply WINGRIP NEXT with roller, brush, or spray, consumption 0.5 kg/m². Apply the screed for slopes on the fresh product

3 SLOPED SCREED

Minimum slope 1%, realized using WINPLAN 370 or WINPLAN PRO. For bonded screeds 1–3 cm thick, it is recommended to use WINGRIP NEXT as adhesion promoter, fresh-on-fresh

4 CORNER REINFORCEMENT

Apply self-adhesive butyl tape BC SEAL BAND in corners. Used together with BC SEAL PAD for sealing drains, outlets, and penetrations

5 WALKABLE WATERPROOFING

Application of ONE system with roller, brush, or spray. Suitable for high traffic, puncture-resistant, and applicable on damp surfaces and extreme temperatures (0–45 °C). Applied in two layers with reinforcement mat ONE MAT. Total consumption 1.9 kg/m²

6 VERTICAL UPSTAND WATERPROOFING

Application of ONE VERTICAL system with roller, brush, or spray. Thixotropic waterproofing for vertical upstands and details, puncture-resistant, applicable on damp surfaces and extreme temperatures (0–45 °C). Applied in a single layer, consumption 0.35 kg/m²

7 SOLAR-SHIELDING / PROTECTIVE ELEMENT

8 SUBFLOOR IN STABILIZED GRAVEL WITH GRID SYSTEM

9 PERMEABLE PAVING

Produced by mixing selected aggregates with WINDECK LEGANTE, a single-component, transparent hybrid resin with medium viscosity, water- and solvent-free. Formulated as a binder for aggregates of different colors and sizes, ideal for walkways or pedestrian paths that are permeable and draining, with an attractive aesthetic. Average mixing ratio: 1:20 (resin:aggregate), adjustable depending on aggregate size. Approximate consumption: 5 kg of resin per 100 kg of aggregates.