INDUSTRIAL FLOOR JOINT RESTORATION

Structural repair and sealing of expansion joints in industrial flooring to ensure seamless heavy-vehicle transit

1 DAMAGED JOINT

2 CUTTING AROUND THE JOINT

Cut The Portions Of The Flooring Around The Joint To A Depth Of Approximately 5 Cm.

3 PRIMING OF SURFACES

Apply UNIBAR FORMULA, a two-component multifunctional resin, as a consolidating and waterproofing primer using a roller or brush, consumption 500 g/m², followed by scattering of 01–03 quartz onto the fresh primer.

4 JOINT RESTORATION

On the fresh primer, apply UNIBAR SCREED, a three-component solvent-free synthetic mortar with high mechanical strength and extended workability, composed of epoxy binders, hardeners, and special aggregates with reactive raw materials (SC3). Recommended thickness: 5 mm. Consumption: 5 kg per linear meter for a joint of 5 cm width × 5 cm height. Subsequently, level the mortar by filling pores with a mixture of UNIBAR FORMULA and 01–03 quartz (approximately 30–60% quartz).

5 RESIN FLOORING CYCLE

6 JOINT CUTTING AND SEALING

Seal The Joint Using Winjoint Seal, A Low-Modulus Polyurethane Sealant.