UNIBAR G

Unibar G, non-slip protective resin, solvent- free and resistant to water, to common solvents and to oils.

It is used both as a final coat of the UNIBAR cycle and on new cement foundation with vapour barrier.

A finishing specifically formulated for floors with MEDIUM-LIGHT traffic, such as pedestrian areas, garages, warehouses, and areas for forklift trucks.

It is exceptionally resistant to being walked on and assures a very good non-slip surface even where there are oil stains.

APPLICATION

UNIBAR NON SLIP FINISH can be applied by roller or paintbrush.

USEFUL TIPS/SURFACE PREPARATION

Use a low-speed or manual drill to evenly blend the two components.

All the components are premixed; therefore, prepare the product in line with the instructions in the technical sheet.

Do not add water or solvents.

Apply at temperatures between +10°C and +35°C.

Do not leave the non-mixed product exposed to heat sources.

CONSUMPTIONS

• Smooth surfaces: 200 – 300 g/m2 in two coats,
• Rough or damaged surfaces: 300 – 400 g/m2 in two coats.

PACKAGES

• 6 kg bucket (A+B),
• Component A: 4.5 kg,
• Component B: 1.5 kg.

COLORS

• Red,
• Grey.

STORAGE

The product in its undamaged packaging can be stored for 12 months.
Not frost-proof.

Store between +10°C and +35°C.