UNIBAR T

Unibar T, water-based, two-component, breathable epoxy formulation designed to create both self-levelling and multi-layer flooring on surfaces that are also subject to moisture and with no vapour barrier.

It creates a surface with good resistance to diluted acid, alkaline and salt solutions.

APPLICATION

Multilayer use Mix the two components and add 25% by weight of quartz 0.1-0. Apply a first coat by trowel, followed by a dusting of quartz 01-03.

After 24 hours remove excess quartz, sand the surface, and apply a coat of product with a smooth trowel.

Multilayer use on tiled floors Place a 140-160 g/m2 glass fibre mesh on the substrate before proceeding with the multilayer cycle.

Self-levelling application After trowelling the surface, proceed with the application of WINFIX FISSATIVO.

hen mix component A+B and apply the product using a notched trowel. Remove air bubbles with a bubble breaker roller.

Finish the cycles by roller application of two coats of UNIBAR F over the entire surface 24 hours after application of the last coat of UNIBAR T.

USEFUL TIPS/SURFACE PREPARATION

Ensure that the application surfaces are clean, free of friable parts, anti-adherent substances, and oils.

Perform thorough sandblasting, sanding, shot peening or milling.

The surface must have a tear resistance of at least 1.5 N/mm2.

CONSUMPTIONS

Consumption varies depending on the chosen cycle and the application method.

PACKAGES

• COMPONENT A: 20 kg,
• COMPONENT B: 2 kg.

COLORS

RAL colours.

STORAGE

The product can be stored in its undamaged package for 12 months.

Store at temperatures between +5°C and +35°C.