WFZ5 -Winflex Cement
WFZ5-Winflex Cement, cement-based two-component weatherproof premixed mortar with selected aggregates and special polymers in aqueous solution.
This highly pliable adhesive is highly resistant to bad weather, to a saline atmosphere, to salts and carbon dioxide.
It can be used either vertically or horizontally for waterproofing bathtubs, bathrooms, showers, terraces, and balconies before laying ceramic tiles, both earthward and foundation walls or for the elastic finish on surfaces subject to mould expansion.
An excellent protection for restoring works together with WR07 FIBROWIN or for pillars, beams, and roadways.
APPLICATION
It can be applied with spatula, trowel or spray gun and can be reinforced by means of an appropriate reinforcement net in fibreglass.
Thickness: 2 mm per coat and maximum 4 mm coat, if reinforced.
USEFUL TIPS/SURFACE PREPARATION
Ensure that the surfaces are clean and free of grease, salts and crumbling or powdery parts.
Mix thoroughly to avoid lumps.
First coat must be thoroughly dry before applying the second coat.
Before laying any waterproof product, check for hidden moisture (see technical data sheet) to avoid scaling and superficial bubbles due to vapour pressure.
Apply at temperatures between +5°C and +35°C.
CONSUMPTIONS
- 1.7 kg/m² per mm thickness
PACKAGES
- 25 kg bags – 60 bags per pallet (A),
- 7.25 kg drums (B).
STORAGE
The product can be stored in its undamaged package for 12 months.
Please store in a shaded and protected place at temperatures between +5°C and +35°C.
WFZ5-Winflex Cement, cement-based two-component weatherproof premixed mortar with selected aggregates and special polymers in aqueous solution.
This highly pliable adhesive is highly resistant to bad weather, to a saline atmosphere, to salts and carbon dioxide.
It can be used either vertically or horizontally for waterproofing bathtubs, bathrooms, showers, terraces, and balconies before laying ceramic tiles, both earthward and foundation walls or for the elastic finish on surfaces subject to mould expansion.
An excellent protection for restoring works together with WR07 FIBROWIN or for pillars, beams, and roadways.
APPLICATION
It can be applied with spatula, trowel or spray gun and can be reinforced by means of an appropriate reinforcement net in fibreglass.
Thickness: 2 mm per coat and maximum 4 mm coat, if reinforced.
USEFUL TIPS/SURFACE PREPARATION
Ensure that the surfaces are clean and free of grease, salts and crumbling or powdery parts.
Mix thoroughly to avoid lumps.
First coat must be thoroughly dry before applying the second coat.
Before laying any waterproof product, check for hidden moisture (see technical data sheet) to avoid scaling and superficial bubbles due to vapour pressure.
Apply at temperatures between +5°C and +35°C.
CONSUMPTIONS
- 1.7 kg/m² per mm thickness
PACKAGES
- 25 kg bags – 60 bags per pallet (A),
- 7.25 kg drums (B).
STORAGE
The product can be stored in its undamaged package for 12 months.
Please store in a shaded and protected place at temperatures between +5°C and +35°C.
Hai bisogno di suggerimenti?
Scopri come applicare il prodotto